Program / Change / Delete Ldap Server - Ricoh Aficio MP 3500 Operating Instructions Manual

Program / Change / Delete LDAP Server

This section describes how to specify the LDAP server settings.
To program / change the LDAP server
This section describes how to program / change the LDAP server.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [TNext] twice.
D
Press [Program / Change / Delete LDAP Server].
E
Check that [Program / Change] is selected.
F
Select the LDAP server you want to program or change.
When programming the server, select [*Not Programmed].
G
Set each item as necessary.
H
Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
I
Press [Exit].
J
Press the {User Tools/Counter} key.
Reference
p.70 "Programming the LDAP server"
To delete the programmed LDAP server
This section describes how to delete the programmed LDAP server.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [TNext] twice.
D
Press [Program / Change / Delete LDAP Server].
E
Press [Delete].
F
Select the LDAP server you want to delete.
G
Press [Yes].
H
Press [Exit].
Administrator Tools
69
2