Program / Change / Delete Ldap Server - Ricoh Aficio MP 2510 Operating Instructions Manual

Reference
p.3 "Accessing User Tools"
p.181 "Address Book"
p.195 "Printing the Counter for Each User"
p.244 "Registering the Transfer Request"
p.257 "Counter"

Program / Change / Delete LDAP Server

This section describes how to specify the LDAP server settings.
To program / change the LDAP server
This section describes how to program / change the LDAP server.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Program / Change / Delete LDAP Server].
D
Check that [Program / Change] is selected.
E
Select the LDAP server you want to program or change.
When programming the server, select [*Not Programmed].
F
Set each item as necessary.
G
Press [OK] after setting each item.
For details about LDAP server, see "Programming the LDAP server".
H
Press [Exit].
I
Press the {User Tools/Counter} key.
Reference
p.68 "Programming the LDAP server"
Administrator Tools
67
2