The Actions Menu - Emerson E2 Installation And Operation Manual

Key Function for
RX
 Suction Group

Condensers

Standard and
Case Circuits
 Sensor Control
and
Power Monitor-
ing

Setup
Table 10-2
- Status Screen Function Keys
Status screen functions are explained in more detail in
Section 12, Operator's Guide to Using the E2 of the man-

ual. For now, press
screen: the Actions menu.

10.7.3 The Actions Menu

Figure 10-10
- The Actions Menu
The Actions Menu is available from any status screen

by pressing Enter , and may be used to do just about
any task in the E2 system software. This screen lists a
number of options that can be used to affect a selected
field, an entire application, or the E2 in general.
•
10-6 E2 RX/BX/CX I&O Manual
Function for Function for
BX CX
AHU AHU
Zones Lighting
Lighting Circuits
Sensors Sensors
Setup Setup
to access another important
Actions Menu Item
Graph Opens graph view for the selected
Log
Override Opens the Override Update win-
dow where the selected input or
Expanded Information
Setup
Detailed Status Special status screen that shows
detailed setpoints and input/out-
put information with complete
Manual Defrost For circuits only. Opens the Cir-
cuit Bypass screen to force a man-
ual or emergency defrost, or wash
Application Com- Allows Service Start/End for Irri-
mands gation and Pulse Accumulation
Applications Logs/
Graphs
Table 10-3
- Actions Menu Options and Descriptions
One of the more important features of the Actions
Menu is the Setup screen
screen will vary, depending on where the cursor is placed
in the Main Status (Home) screen before
This is the easiest way to edit an existing application.
For more information on usage of the Setup screen and
how to implement its functions, see Section 12.11.1.2,
Setup Screens.
Description
value.
Opens the Log screen of the
selected value.
output can be overridden to a
user-defined value or state.
Displays detailed information
about the selected value.
Opens the setup screen for the
selected value.
summary of inputs, outputs.
mode.
applications.
• Opens various log and
graph screens for Anti-
sweat and Pulse Accumu-
lation applications.
• Opens the Circuit Report
screen for standard circuits
only.

(Setup). The actual setup

is pressed.
026-1610 Rev 12 25-APR-2011