Mld Snooping Global Querier Configuration - Dell Networking 7048 Configuration Manual

Copying MLD Snooping Settings to VLANs
To copy MLD snooping settings:
1 From the General MLD snooping page, click Show All.
The MLD Snooping Table displays.
2 Select the Copy Parameters From checkbox.
3 Select a VLAN to use as the source of the desired parameters.
4 Select the Copy To checkbox for the VLANs that these parameters will be
copied to.
5 Click Apply.
The MLD snooping settings are modified, and the device is updated.

MLD Snooping Global Querier Configuration

Use the MLD Snooping Global Querier Configuration page to configure the
parameters for the MLD snooping querier.
To display the Global Querier Configuration page, click Switching →
Multicast Support → MLD Snooping → Global Querier Configuration in
the navigation menu.
Figure 25-16. MLD Snooping Global Querier Configuration
Configuring L2 Multicast Features
731