Configuring Voice Vlans - Dell Networking 7048 Configuration Manual

Configuring Voice VLANs

Beginning in Privileged EXEC mode, use the following commands to enable
the Voice VLAN feature on the switch and on an interface.
Command
configure
voice vlan
interface
interface
vlanid
voice vlan {
priority
dot1p | none |
untagged | data
{trust | untrust} | auth
{enable | disable} |
value
dscp }
CTRL + Z
show voice vlan
interface
[interface {
|all}]
612
Configuring VLANs
Purpose
Enter global configuration mode.
Enable the voice vlan capability on the switch.
Enter interface configuration mode for the specified
interface.
interface
specify a range of interfaces with the interface range
command, for example, interface range gi1/0/8-12 enters
Interface Configuration mode for ports 8–12.
| Enable the voice vlan capability on the interface.
vlanid
•
priority
priority
•
port.
• trust—Trust the dot1p priority or DSCP values
contained in packets arriving on the voice vlan port.
• untrust—Do not trust the dot1p priority or DSCP values
contained in packets arriving on the voice vlan port.
• auth {enable | disable} — Use enable to allow voice
traffic on unauthorized voice vlan port. Use disable to
prevent voice traffic on an Unauthorized voice vlan port
value
• dscp
Exit to Privileged EXEC mode.
Display voice VLAN configuration information for the
switch, for the specified interface, or for all interfaces.
— Specific interface, such as gi1/0/8. You can also
—The voice VLAN ID.
—The Dot1p priority for the voice VLAN on the
—The DSCP value (Range: 0–64).