Dell Networking 7048 Configuration Manual page 1051

8 Specify the IP address that the virtual router function will use.
The router is the virtual IP address owner of this address, so the priority
value is 255 by default.
console(config-if-vlan10)#vrrp 20 ip 192.168.10.2
9 Configure an optional description to help identify the VRRP group.
console(config-if-vlan10)#vrrp 20 description backup
10 Enable the VRRP groups on the interface.
console(config-if-vlan10)#ip vrrp 10 mode
console(config-if-vlan10)#ip vrrp 20 mode
console(config-if-vlan10)#exit
console(config)#exit
Configuring VRRP
1051