Ssm Range Configuration - Dell Networking 7048 Configuration Manual

SSM Range Configuration

Use this page to display or remove the Source Specific Multicast (SSM) group
IP address and group mask for the PIM router.
To display the page, click IPv4 Multicast → PIM → SSM Range
Configuration or IPv6 Multicast → PIM → SSM Range Configuration.
Figure 42-44. SSM Range Configuration
Adding an SSM Range
To add the Source-Specific Multicast (SSM) Group IP Address and Group
Mask (IPv4) or Prefix Length (IPv6) for the PIM router:
1 Open the SSM Range Configuration page.
2 Click Add.
The Add SSM Range page displays.
1208
Managing IPv4 and IPv6 Multicast