Dell Networking 7048 Configuration Manual page 1074

Command
ipv6 nd ns-interval
milliseconds
ipv6 nd other-config-
flag
ipv6 nd managed-
config-flag
ipv6 nd reachable-
milliseconds
time
1074
Configuring IPv6 Routing
Purpose
Set the interval between router advertisements for advertised
neighbor solicitations. The range is 1000 to 4294967295
milliseconds.
other stateful configuration
Set the
advertisements sent from the interface.
managed address configuration
Set the
advertisements. When the value is true, end nodes use
DHCPv6. When the value is false, end nodes automatically
configure addresses.
Set the router advertisement time to consider a neighbor
reachable after neighbor discovery confirmation.
flag in router
flag in router