Dell Networking 7048 Configuration Manual page 1220

Command
exit
exit
show ip multicast
show ip mcast boundary
vlan-id
{vlan | all}
show ip mcast mroute
{detail | summary}
show mac address-table
multicast [count]
show ip mcast mroute
groupipaddr
group
summary}
show ip mcast mroute
sourceipaddr
source
groupipaddr
{summary |
show ip mcast mroute static
sourceipaddr
[ ]
1220
Managing IPv4 and IPv6 Multicast
Purpose
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View system-wide multicast information.
View all the configured administrative scoped multicast
boundaries.
View a summary or all the details of the multicast table.
View information about the entries in the multicast
address table.
View the multicast configuration settings such as flags,
{detail | timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the
groupipaddr
View the multicast configuration settings such as flags,
timer settings, incoming and outgoing interfaces, RPF
} neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the
sourceipaddr
value(s).
View all the static routes configured in the static mcast
table if it is specified or display the static route
associated with the particular
value.
sourceipaddr
or |
sourceipaddr
groupipaddr
pair
.