Configuring Ospf Area Range Settings - Dell Networking 7048 Configuration Manual

Configuring OSPF Area Range Settings

Beginning in Privileged EXEC mode, use the following commands to
configure an OSPF area range.
Command
configure
router ospf
area-id
area range
ip-address mask
{summarylink |
nssaexternallink}
[advertise
|not-advertise]
exit
exit
show ip ospf range
area-id
Configuring OSPF Route Redistribution Settings
Beginning in Privileged EXEC mode, use the following commands to
configure OSPF route redistribution settings.
Command
configure
router ospf
984
Configuring OSPF and OSPFv3
Purpose
Enter global configuration mode.
Enter OSPF configuration mode.
Configure a summary prefix for routes learned in a given area.
area-id
• — Identifies the OSPF NSSA to configure. (Range: IP
address or decimal from 0–4294967295)
ip-address
• — IP address.
subnet-mask
• — Subnet mask associated with IP address.
• summarylink — Specifies a summary link LSDB type.
• nssaexternallink — Specifies an NSSA external link LSDB
type.
• advertise — Advertisement of the area range.
• not-advertise — Suppresses advertisement of the area range.
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View information about the area ranges for the specified
area-id
.
Purpose
Enter global configuration mode.
Enter OSPF configuration mode.