Dvmrp Interface Configuration - Dell Networking 7048 Configuration Manual

DVMRP Interface Configuration

Use the Interface Configuration page to configure a DVMRP VLAN routing
interface. You must configure at least one router interface before you
configure a DVMRP interface. Otherwise you see a message telling you that
no router interfaces are available, and the configuration screen is not
displayed. It is strongly recommended that IGMP be enabled on any interface
on which DVMRP is enabled. This ensures that the multicast router behaves
as expected.
To display the page, click IPv4 Multicast → DVMRP → Interface
Configuration in the navigation panel.
Figure 42-49. DVMRP Interface Configuration
1213
Managing IPv4 and IPv6 Multicast