Configuring A Dhcpv6 Pool For Specific Hosts - Dell Networking 7048 Configuration Manual

Command
domain-name
CTRL + Z
show ipv6 dhcp pool
name
[ ]

Configuring a DHCPv6 Pool for Specific Hosts

Beginning in Privileged EXEC mode, use the following commands to create a
pool and/or configure pool parameters for specific DHCPv6 clients.
Command
configure
ipv6 dhcp pool
prefix-delegation
prefix/prefix-length
client-DUID
[name
hostname
] [valid-
valid-lifetime
lifetime {
infinite}] [preferred-
preferred-
lifetime {
lifetime
| infinite}]
CTRL + Z
show ipv6 dhcp pool
1094
Configuring DHCPv6 Server and Relay Settings
Purpose
domain
Set up to 5 DNS domain names to provide to a DHCPv6
client by the DHCPv6 server.
Exit to Privileged EXEC mode.
View the settings for all DHCPv6 pools or for the specified
pool.
Purpose
Enter Global Configuration mode.
name
Create a DHCPv6 pool and enter DHCPv6 pool
configuration mode.
ipv6-
Define an IPv6 prefixes within a pool for distributing to
specific DHCPv6 Prefix delegation clients.
prefix/prefix-length
•
client-DUID
•
|
(e.g. 00:01:00:09:f8:79:4e:00:04:76:73:43:76').
hostname
•
tracing. (Range: 0-31 characters.) The command allows
spaces in the host name.
valid-lifetime
•
(Range: 0-4294967295 seconds) or use the keyword
infinite.
preferred-lifetime
•
prefix. (Range: 0-4294967295 seconds) or use the
keyword infinite.
Exit to Privileged EXEC mode.
View information about the DHCPv6 pools configured on
the switch.
—Delegated IPv6 prefix.
—DHCP Unique Identifier for the client
—Client hostname used for logging and
—Valid lifetime for delegated prefix.
—Preferred lifetime for delegated