Configuring Interface Queue Drop Probability - Dell Networking 7048 Configuration Manual

Configuring Interface Queue Drop Probability

Beginning in Privileged Exec mode, use the following commands in to
configure characteristics of the drop probability and view related settings. The
drop probability supports configuration in the range of 0 to 10%, and the
discrete values 25%, 50%, and 75%. Values not listed are truncated to the next
lower value in hardware.
CLI Command
configure
interface
interface
random-detect queue-parms
queue-id queue-id
[
min1 min2 min3 min4
thresh
max1 max2 max3
max-thresh
max4 prob1 prob2
drop-prob
prob3 prob4
exit
exit
show interfaces random-detect Display WRED parameters for an interface or all
Description
Enter Global Configuration mode.
Enter Interface Configuration mode, where
interface
unit/slot/port
port-channel
Configure the maximum and minimum thresholds
...] min- for one or more queue IDs on a WRED-enabled
interface queue.
You can also use this command in Global
Configuration mode to configure the same
parameters for one or more queues on all interfaces.
Exit to Global Config mode.
Exit to Privilege Exec mode.
interfaces.
is replaced by gigabitethernet
, tengigabitethernet
port-channel number
Configuring Class-of-Service
unit/slot/port
, or
.
1143