Default Stp Values - Dell Networking 7048 Configuration Manual

Default STP Values

Spanning tree is globally enabled on the switch and on all ports and LAGs.
Table 22-1 summarizes the default values for STP.
Table 22-1. STP Defaults
Parameter
Enable state
Spanning-tree mode
Switch priority
BPDU flooding
PortFast mode
PortFast BPDU filter
Loop guard
BPDU protection
Spanning tree port priority
Maximum-aging time
Forward-delay time
Maximum hops
Spanning-tree transmit hold count
MSTP region name
MSTP included VLANs
Default Value
Enabled (globally and on all ports)
RSTP (Classic STP and MSTP are disabled)
32768
Disabled
Disabled
Disabled
Disabled
Disabled
128
20 seconds
15 seconds
20
6
MAC address of switch
1
Configuring the Spanning Tree Protocol
639