Example 1: Creating A Set Of Video And Audio Ties - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd
N •

Example 1: Creating a set of video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the
front panel indications that result from your actions.
N This example assumes that there are no ties in the current confi guration.
1.
Figure 3-4 — Clear all selections
2.
Figure 3-5 — Select RGBHV or video and audio
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-10
Only one video input and one audio input can be tied to an output.
• If a tie is made between an input and an output, and the selected output was
previously tied to another input, the older tie is broken in favor of the newer
tie.
• If an input with no tie is selected, only that input's button lights.
• When the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus
video switchers) button and Audio button are lit, if an input with an audio
tie but no video tie is selected, the input's button lights amber and the output
button lights the appropriate color (amber, green, or red).
• As each input and output is selected, the associated output button blinks the
appropriate color to indicate a tentative tie. Buttons for output(s) that were
already tied to the input light the appropriate color steadily. Outputs that are
already tied can be left on, along with new blinking selections, or toggled off
by pressing the associated output button.
• If you press the input button for an I/O grouped input and then try to
select an output in a different group, the associated output button cannot be
selected. The associated input button remains lit.
Press and release the Esc button (fi gure 3-4).
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
To select video and audio for the tie, if necessary, press and release the
RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus video switchers)
button and the Audio button until the buttons light (fi gure 3-5).
Press the RGBHV/Video button to toggle on and off.
The button lights green when selected.
I / O
RGBHV AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.