Extron electronics CrossPoint 450 Plus Series User Manual page 53

Press and release the input 1 through 4 and output 1 through 4 buttons
4.
(fi gure 3-32).
Press and release the Input 1 through Input 4 buttons. The selected buttons light.
1 2 3 4
17 18 19 20 21 22 23 24
Press and release the Output 1 through Output 4 buttons. The selected buttons light.
1 2 3 4
17 18 19 20 21 22 23 24
Figure 3-32 — Assign inputs and outputs
5. Press and release the Preset button to select group 2 (fi gure 3-33).
Press and release the Preset button to select group 2.
The button lights amber to indicate the selection.
C O N T R O L
ENTER PRESET
Group # 1 2
Figure 3-33 — Select an I/O group
6. Press and release the input 5 through 8 and output 5 through 8 buttons
(fi gure 3-34).
Press and release the Input 5 through Input 8 buttons. The selected buttons light.
1 2 3 4
1 2 3 4
17 18 19 20 21 22 23 24
17 18 19 20 21 22 23 24
Press and release the Output 5 through Output 8 buttons. The selected buttons light.
1 2 3 4
17 18 19 20 21 22 23 24
Figure 3-34 — Assign inputs and outputs
7. Do nothing for approximately 30 seconds. The front panel times out and the
switcher exits I/O Group mode.
• Group 1 consists of inputs 1 through 4 and outputs 1 through 4.
Group 2 consists of inputs 5 through 8 and outputs 5 through 8.
•
CrossPoint 450 Plus and MAV Plus Switchers • Operation
5 6 7 8 9
25
I
N
5 6 7 8 9
25
O
U
T
VIEW ESC
3 4
5 6 7 8 9
I
5 6 7 8
N
P
U
25
I
T
N
S
5 6 7 8 9
25
O
U
T
3-23