Extron electronics CrossPoint 450 Plus Series User Manual page 95

Command/response table for SIS commands (continued)
Command
Save, recall, and directly write presets
N
• If the user tries to recall a preset that is not saved, the matrix switcher responds with the error code E11.
• If the room is nonexistent, the matrix switcher responds with the error code E21.
• The following characters are invalid in preset names: + ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
Save current the current
confi guration as a global
preset
Example:
Direct write process —
N The direct write of a global preset command should always be preceded by a clear global preset command of that
same preset number, as shown below. In a directly-written preset, each output position's tied input (or no tied output)
remains unchanged unless overwritten or cleared.
If you do not clear a global preset number before you directly write a global preset to that number, ties that are part of
the previous version of the specifi ed preset can unexpectedly become part of the newly-created preset.
Clear a global preset
Directly write a global
preset
Example:
Recall a global preset
Example:
Write room outputs
Y`
N
• Each is an output.
• A room can contain a maximum of 16 outputs (
• An output can belong to one room only.
• The maximum number of rooms (
• If no room name is assigned, the dafault name is "Room #
Example:
Read room outputs
Example:
Save current confi guration
as a room preset
Example:
CrossPoint 450 Plus and MAV Plus Switchers • SIS Programming and Control
ASCII command Response
(host to switcher) (switcher to host)
X1!
, Spr
9,
Spr09
E X1! }
+ P0*! Spr
E X1! X@ X# X@ X# X@ X#
+ P * ! * % *
Spr
E }
+27P0*! Spr27
E
+27P22*5!15*29%13*26$3*8&
Spr27
X1!
. Rpr
5.
Rpr
EX* Y! Y@ Y# Y/ }
, , , , ..., MR
Mpr
Y`
s).
X*
) is 10.
E }
8,3,04,5,6MR Mpr8,03,04,05,06
EX* } X2!
MR
E }
3MR Class 1,01,02,08,09
X* X1@
* , Rmm
3*9,
Rmm03
Additional
description
X1!]
Command character is a
comma.
]
Save current ties as preset 9.
X1!]
Clear all ties in preset
X@ X# }
Enter as many ties as are
$ ... * &
X1!] valid for this model. The
tie all (!), tie RGBHV (&), tie
video (%), and tie audio ($)
commands are all valid.
]
Brackets are shown to
separate ties for clarity only.
Create global preset 27,
]
which ties video and audio
input 22 to output 5,
RGBHV input 15 to output 29,
video input 13 to output 26,
and audio input 3 to output 8.
X1!]
Command character is a
period.
X1!]
Recall preset 5, which
becomes the current
confi guration.
See notes.
X* Y! Y@ Y# Y/]
, , , , ...,
X*•Y! •Y@ •Y#
, , ".
]
Outputs 3, 4, 5, and 6 are
assigned to room 8.
Y! Y@ Y# Y/]
, , , , ...,
]
Outputs 1, 2, 8, and 9 are
assigned to room 3, which is
named "Class 1".
X*• X1@]
Command character is a
Spr
comma.
• ]
Save the current
Spr09
confi guration as preset 9 for
room 3.
X1!
.
4-13