Extron electronics CrossPoint 450 Plus Series User Manual page 18

Introduction, cont'd
Labeling — Extron's included button label software lets you create labels to place
Global memory presets — 64 global memory presets are a time-saving feature that
Rack mounting — Rack mountable in any conventional 19" wide rack.
Front panel security lockout (Executive mode) — If a matrix switcher BME with
I/O grouping — Allows the matrix to be virtually divided into smaller
Primary and redundant power supplies — Includes two internal 100 VAC
Power supply status LEDs — Front panel LEDs indicate the status of the primary
CrossPoint 450 Plus and MAV Plus Switchers • Introduction
1-8
in the front panel I/O buttons, with names, alphanumeric characters, or color
bitmaps for easy and intuitive input and output selection. Alternatively,
labels can be made with any Brother™ P-Touch™ or comparable labeler.
lets you set up and store input/output confi gurations in advance. You can
then recall those confi gurations, when needed, with a few simple steps.
a QS-FPC is installed in an open area where operation by unauthorized
personnel may be a problem, a security lockout feature can be implemented.
When the front panel is locked, a special button combination or SIS command
is required to unlock the front panel controller before it can be operated.
sub-switchers, making installation and control easier. I/O grouping allows
specifi c inputs and outputs, such as those designated for a specifi c purpose,
to be grouped together. I/O grouping limits the selection of inputs and
outputs to members of the same group.
to 240 VAC, 50/60 Hz, auto-switchable power supplies, which provide
worldwide power compatibility.
The power supply circuitry is confi gured to automatically switch over from
the primary supply to the hot redundant supply in the case of a failure.
The hot redundant power supply means high reliability for the system and
no loss of functionality should the primary supply fail; the redundant power
supply immediately assumes the load.
and redundant power supplies.