Pinging To Determine Extron Ip Address; Pinging To Determine Web Ip Address - Extron electronics CrossPoint 450 Plus Series User Manual

Pinging to determine Extron IP address

The Microsoft Ping utility is available at the DOS prompt. Ping tests the Ethernet
interface between the computer and a switcher BME (usually BME 0). Ping can also
be used to determine the actual numeric IP address from an alias and to determine
the web address.
Ping the switcher as follows:
1. On the Windows task bar, click on Start > Run.
2. At the Open prompt, type command.
3. Click the OK button.
4. At the DOS prompt, type ping {IP address} and then press [Enter]. The
computer returns a display similar to fi gure A-2.
The line Pinging ... reports the actual numeric IP address, regardless of
whether you entered the actual numeric IP address or an alias name.
C:\>ping 192.168.254.254
Pinging 192.168.254.254 with 32 bytes of data:
Reply from 192.168.254.254: bytes=32 time<10ms TTL=128
Reply from 192.168.254.254: bytes=32 time<10ms TTL=128
Reply from 192.168.254.254: bytes=32 time<10ms TTL=128
Reply from 192.168.254.254: bytes=32 time<10ms TTL=128
Ping statistics for 192.168.254.254:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Figure A-2 — Ping response

Pinging to determine Web IP address

The Ping utility has a modifi er, -a, that directs the command to return the Web
address rather than the numeric IP address.
At the DOS prompt, type ping -a {IP address} and then press [Enter]. The computer's
return display is similar to the Ping response shown in fi gure A-2, except that when
you specify the -a modifi er, the line Pinging mail... reports the web IP address
rather than the numeric IP address, regardless of whether you entered the actual
numeric IP address or an alias name.
CrossPoint 450 Plus and MAV Plus Switchers • Ethernet Connection
A-3