Passwords Page - Extron electronics CrossPoint 450 Plus Series User Manual

Large scale matrix switchers
Hide thumbs Also See for CrossPoint 450 Plus Series:
Table of Contents

Advertisement

HTML Operation, cont'd

Passwords page

Access the Passwords page (fi gure 6-6) by clicking the Passwords link on the
System Settings page.
Select System Settings
Select Email Settings
Select Firmware Upgrade
Figure 6-6 — Passwords page
The fi elds on the Passwords page are for entering and verifying administrator and
user passwords. Passwords are case sensitive and are limited to 12 upper case and
lower case alphanumeric characters. Each password must be entered twice; once
in the Password fi eld and then again in the Re-enter Password fi eld. Characters in
these fi elds are masked by asterisks (*****). If you do not want to password protect
an access level, leave the Password fi eld and the Re-Enter password fi eld blank.
After entering the desired password in both fi elds, click the Submit button.
N An administrator password must be created before a user password can be
To clear an existing password so that no password is required, enter a space in the
Password and Re-enter Password fi elds and click the Submit button.
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
6-8
created.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mav plus seriesMav plus

Table of Contents