Viewing A Confi Guration - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd
Viewing a confi guration
The current confi guration can be viewed using the front panel buttons. The
View-Only mode prevents inadvertent changes to the current confi guration.
View-Only mode also provides a way to mute video and audio outputs (see
Muting and unmuting video and/or audio outputs on page 3-29.
View the current confi guration as follows:
1.
2.
3.
4.
5.
N •
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-16
Press the Esc button to clear any input button indications, output button
indications, or control button indications that may be on.
Press and release the View button. All of the buttons for outputs that are not
tied light:
• Amber: No tied video or audio input
• Green: No tied video input
• Red: No tied audio input
Select video, audio, or both to view by pressing the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus video switchers) button
and/or the Audio button.
Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
Press and release the View button ro exit View-Only mode:
When you enter View-Only mode, the output buttons light for all outputs
without ties.
• If you are viewing tied inputs and outputs and an output button for which
there are no ties is pushed, the output buttons turn on for all outputs without
ties.
• To see all ties of the current confi guration, press and release each input
and output button, one at a time, with the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus video switchers) button and the Audio
button lit.
• In View-Only mode, you can view video and audio, video-only, or audio-only
ties. Pressing and releasing the RGBHV (CrossPoint 450 Plus switchers) or
Video (MAV Plus video switchers) button and the Audio button toggles each
on and off.
• When you view video and audio ties, the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus video switchers) button is lit green and
the Audio button is lit red. After you select an input or output, the output
buttons light different colors to show where video and audio ties are not the
same (audio is broken away).
Amber — video and audio
Green — video only
Red — audio only
• After 30 seconds of front panel inactivity, View-Only mode automatically
deselects.