Ip Settings/Options Window - Extron electronics CrossPoint 450 Plus Series User Manual

IP Settings/Options window

The IP Settings/Options window (fi gure 5-5), accessible via the Tools menu,
provides a location for viewing and, if connected via the RS-232/RS-422 link or if
logged on via the Ethernet port as an administrator, editing settings unique to the
Ethernet interface. See appendix A, Ethernet Connection, for basic information about
IP addresses. None of the fi elds on this screen can be edited while you are logged
on as a user.
Figure 5-5 — Control program IP setting/options window
N Editing variables on the IP Settings/Options screen while connected via the
Ethernet port can immediately disconnect the user from the switcher. Extron
recommends editing the settings on this screen using the RS-232 link and
protecting the Ethernet access to this screen by assigning an administrator's
password to qualifi ed and knowledgeable personnel only.
N When the control program is connected to the switcher via the RS-232 link, the
Administrator and User Password fi elds are not masked. If a password has been
inadvertently changed to an unknown value, you can look up and, if desired,
change a password in this window without knowing the current password.
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
5-7