Example 1: Creating A Set Of Video And Audio Ties - Extron electronics CrossPoint 450 Plus Series User Manual

• When the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus
switchers) button and Audio button are lit, if an input with an audio tie
but no video tie is selected, the input's button lights amber (matrix sizes
up to 1616) or green (matrix sizes 3232 and above) and the output button
lights the appropriate color (amber, green, or red).
• As each input and output is selected, the associated output button blinks
the appropriate color to indicate a tentative tie. Buttons for output(s) that
were already tied to the input light the appropriate color steadily.
Outputs that are already tied can be left on, along with new blinking
selections, or toggled off by pressing the associated output button.
• If you press the input button for an I/O grouped input and then try to
select an output in a different group, the associated output button cannot
be selected. The associated input button remains lit.

Example 1: Creating a set of video and audio ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the
front panel indications that result from your action.
This example assumes that there are no ties in the current configuration.
1. Press and release the Esc button (figure 3-5).
Press the Esc button to clear all
C O N T R O L
VIEW
ENTER PRESET
The button flashes
Figure 3-5 — Clear all selections
2. To select video and audio for the tie, if necessary, press and release the
RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus switchers)
button and the Audio button until the buttons light (figure 3-6).
Press the RGBHV/Video button to toggle on and off.
The button lights green when selected.
Figure 3-6 — Select RGBHV or video and audio
3. Press and release the input 5 button (figure 3-7).
Press and release the Input 5 button.
The button lights amber (matrix sizes up to 1616) or
green (matrix sizes 2412 through 3232).
1 2 3
17 18 19 20 21 22 23 24 31 32
Figure 3-7 — Select an input
CrossPoint 450 Plus and MAV Plus Switchers • Operation
selections.
ESC
once.
I / O
RGBHV AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
4 5 6 7 8 15 16
I
N
P
U
T
S
3-11