Command/Response Table For Ip Sis Commands; Symbol Defi Nitions - Extron electronics CrossPoint 450 Plus Series User Manual

Command/Response table for IP SIS commands

Symbol defi nitions
X3)
= Matrix name
N The following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ' " ; : \ | and ?.
X3!
= Default name
X3@
= Time and date (set)
X3#
= Time and date (read)
X3$
= GMT offset
X3%
= Daylight Savings Time
X3^
= IP address
X3&
= Hardware (MAC) address
X3*
= Number of open connections
X3(
= Password
N The following characters are invalid in passwords: {space} ~ , @ = ` [ ] { } < > ' " ; : \ | and ?.
X4)
= Domain name
N The following characters are invalid in passwords: {space} ~ , = ` [ ] { } < > ' " ; : \ | and ?
The @ character is only acceptable as the lead-in to the domain name (such as @extron.com).
X4!
= E-mail account
X4@
= E-mail address
X4#
- Notify when?
X4$
= Notifi cation selections
X4%
= Notify status (for read)
X4^
= DHCP
X4&
= Port #
X4*
= Baud rate
X4(
= Parity
X5)
= Data bits
X5!
= Stop bits
X5@
= Port type
X5#
= Verbose mode
N If tagged responses is enabled, all read commands return the constant string and the value as the set command does (for example, the read
matrix name command, E CN } , returns IPN •X3)] ).
CrossPoint 450 Plus and MAV Plus Switchers • SIS Programming and Control
(Up to 240 characters)
Factory default name (model name + last 3 pairs of MAC address)
In the format: MM/DD/YY•HH:MM:SS where:
MM = month: 01 (January) through 12 (December)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where
Day = weekday: Mon through Sun
DD = day: 01 through 31
Mmm = month: Jan through Dec
YYYY = year: 2000 through 2099
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
-12.0 through +14.0 (hours and minutes removed from GMT)
0 = Daylight Savings Time off/ignore
1 = Daylight Savings Time on (northern hemisphere)
2 = Daylight Savings Time on (Europe)
3 = Daylight Savings Time on (Brazil)
###-###-###-###
##-##-##-##-##-##
0 - 255
12 alphanumeric characters
Standard domain name conventions apply (for example, xxx.com)
65 - 72. 65 = e-mail recipient #1, 66 = 2, 67 = 3, ... , 72 = recipient #8.
Typical e-mail address format (for example: nnnnn@xxx.com)
0 = No response, 1 = fail/missing, 2 = fi xed/restored, 3 = both 1 and 2
01 through 64 = input numbers
98 = power supplies
99 = fans
66-digit number. For each digit: 0 = do not notify, 1 = notify.
0 = off, 1 = on
01 = rear panel Remote port
02 = front panel Confi guration port)
9600, 19200, 38400, 115200
Odd, even, none, mark, space (only fi rst letter required)
7, 8
1, 2
0 = RS-232, 1 = RS-422, 2 = RS-485
0 = Clear/none (default for Telnet connection
1 = Verbose mode (default for RS-232 / RS-422 connection)
2 = Tagged responses for queries
3 = Verbose mode and tagged for queries
4-19