Time (Local) Fi Eld; Sync Time To Pc Button; Gmt (Offset) Fi Eld; Use Daylight Savings Checkbox - Extron electronics CrossPoint 450 Plus Series User Manual

Matrix Software, cont'd
Time (local) fi eld
The Time (local) fi eld displays the current time in the local time zone. If necessary,
click on the Sync Time to PC button to set the switcher to your computer's internal
time or else adjust the time manually as follows:
1.
2.
3.
4.

Sync Time to PC button

Clicking the mouse on the Sync Time to PC button causes the computer you are
operating to send its internal time to the switcher in a set time command.
GMT (offset) fi eld
The GMT fi eld displays the amount of time, in hours and minutes, that the local
time varies from the GMT international time reference. If necessary, adjust the
offset as follows:
1.
2.
3.
4.

Use Daylight Savings checkbox

Click in the Use Daylight Savings checkbox. When Daylight Savings Time is turned
on, the switcher automatically updates its internal clock between Standard Time
and Daylight Savings Time in the spring and fall on the date that the time change
occurs in the country or region selected. When Daylight Savings Time is turned off,
the switcher does not adjust its time reference.
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
5-10
Click in the time fi eld. A set time fi eld appears
with the date in the format HH:MM:SS
(00:00:00 to 23:59:59). The graphic cursor becomes a
text cursor in the set time fi eld.
Edit the fi eld as desired to set the proper time. Remember to use 24-hour
time. Leading zeroes are optional.
Press the Tab key on the keyboard or click in another fi eld to exit the set time
fi eld.
Click the Take button to make the time change take affect.
Click in the GMT fi eld. A set offset fi eld appears with the offset
in the format ±HH:MM (–12:00 to +14:00). The graphic cursor
becomes a text cursor in the set offset fi eld.
Edit the fi eld as desired to set the proper offset. Leading zeroes are optional.
Some time zones are on the half-hour (30 minutes).
Press the Tab key on the keyboard or click in another fi eld to exit the Set Offset
fi eld.
Click the Take button to make the offset change take affect.