Change The Rgb Delay (Systems With Crosspoint 450 Plus Sync Bmes) - Extron electronics CrossPoint 450 Plus Series User Manual

Change the RGB delay (sytems with CrossPoint 450 Plus sync BMEs)
The RGB delay interval defi nes how long the screen is blanked when switching to
a new input for the selected output. This value can be set from 00 to 5 seconds in
0.5-second increments.
Change the RGB delay as follows:
1. Click the Output drop box. A drop down scroll box appears (fi gure 6-16).
Figure 6-16 — Output selection drop box
2. Click and drag the slider or click the scroll up
button until the desired output is visible.
3. Click the desired output.
4. Click the RGB delay drop box. A drop down scroll box appears (fi gure 6-17).
Figure 6-17 — RGB delay drop box
5. Click the desired RGB delay.
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
button or scroll down
6-17