Extron electronics CrossPoint 450 Plus Series User Manual page 100

SIS ™ Programming and Control, cont'd
Command/response table for SIS commands (continued)
Command
Information requests
Information request
Example:
(MAV 450 Plus 6448
with a connected audio
BME)
Request part number
Example:
N There are up to three separate sets of Extron fi rmware that the switcher can report on: the CrossPoint/MAV Plus
controller fi rmware, which is the overall control fi rmware; the Ethernet protocol fi rmware, which handles the Ethernet
interface; and the latest optional Extron fi rmware update, which is available at www.Extron.com.
Query controller fi rmware
version
Example:
Query software version
(verbose)
Response description: Ethernet protocol fi rmware version - controller fi rmware version - updated fi rmware version
Example:
Description
1.23-0.14(0.20-64x64 Series -Wed, 22 Feb 2006 00:00:00 GMT)-0.25*(0.24-64x64 Series -Thu, 16 Mar 2006 16:39:21 GMT)
Response:
Ethernet protocol CrossPoint/MAV firmware version
firmware
Request system status
Response description:
• •
+5V +3.3V +2.5V
Example:
N If one of the variables is not applicable to a BME (such as fans for a video BME), the response for that variable is "---".
CrossPoint 450 Plus and MAV Plus Switchers • SIS Programming and Control
4-18
ASCII command
(host to switcher)
I
I
N
N
Q
Q
0Q
0Q
* indicates the version running
S
X2@•X2@•X2@•X2@•X2@•X2@•X2@•X2#•X2$•X2$•X(•X(]
• • • •
Fan voltage -5V -12V +12V
S
4.98•3.30•2.55•11.52•-5.21•-12.35•11.65•78.80•753•774•1•1
5V power system at 4.98V
Response Additional
description
(switcher to host)
X@ X#• X@ X# X1* X1(]
V X A X T U
V
A
T
U
system.
• • • ]
V64X48 A64X48 T2 U2
This low resolution matrix
switcher (T2) has 64 video
and 64 audio inputs by 48
video and 48 audio inputs.
This is a two BME system
(a video and and audio BME).
nn-nnn-nn See appendix A for numbers.
60-768-41 CrossPoint 450 Plus 6464
with front panel controller.
X1&]
]
The factory-installed
1.23
CrossPoint Plus / MAV Plus
controller fi rmware version
is 1.23 (sample value only).
X1& X2) X2)]
Provide a detailed
- -
status of the Ethernet
protocol fi rmware, the
CrossPoint 450 Plus /
MAV Plus controller
fi rmware, and any fi rmware
upgrade. The fi rmware that
is running is marked by
an asterisk (*). A caret (^)
indicates that the fi rmware
has a bad checksum or an
invalid load. ?.?? indicates
that the fi rmware is not
loaded.
Upload date and time
Updated firmware version
• • • •
Temp Fan1 RPM Fan2 RPM
Fans receiving 11.52 V Secondary power supply is on and Ok
X@ X#
X = video size,
X@ X#
X = audio size
X1*
= BME type
X1(
= number of BMEs in
]
• ]
Primary PS Secondary PS
Fan 1 rotating at 753 RPM