Example 9: Muting And Unmuting An Output - Extron electronics CrossPoint 450 Plus Series User Manual

Operation, cont'd

Example 9: Muting and unmuting an output

In the following example, several switcher outputs are muted and unmuted. The
steps show the front panel indications that result from your action.
1.
Figure 3-48 — Clear all selections
2.
3.
N This example shows the front panel indications if example 1, example 2, and
Figure 3-49 — Select RGBHV or video and audio
CrossPoint 450 Plus and MAV Plus Switchers • Operation
3-30
Press and release the Esc button (fi gure 3-48).
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button flashes once.
Press and release the View button to enter View-Only mode. The View button
lights red.
To select both video and audio for viewing and muting, if necessary, press and
release the RGBHV (CrossPoint 450 Plus switchers) or Video (MAV Plus video
switchers) button and the Audio button (fi gure 3-49).
example 3 have been completed.
I / O
VIDEO AUDIO
Press the RGBHV/ Video Press the Audio button
button to toggle on and off. to toggle on and off.
The button lights green The button lights red
when selected. when selected.
Until you select an input, the buttons for all untied outputs light
amber if no inputs are tied, green if no video inputs are tied
(only audio is tied), or red if no audio inputs are tied (only
video is tied).
Until you select an input, the buttons for all untied outputs light
amber if no inputs are tied, green if no video inputs are tied
(only audio is tied), or red if no audio inputs are tied (only
video is tied).
1 2
3 4 5 6
17 18 19 20 21 22 23 24 25
49 50 51 52 53 54 55 56 57
7 8
9
O
U
T
P
U
T
S