How To Use The Fax Function; Sending Documents; Setting The Document - Sharp AR-F151 Facsimile Operation Manual

Hide thumbs Also See for AR-F151:

Table of Contents

4. HOW TO USE THE FAX FUNCTION

The stand alone fax component of your unit offers a range of sophisticated features

that allow you to control image quality, reception mode, broadcasting, polling, and

transmission priorities. Functions such as sending documents from memory and

substituting reception into memory are possible, due to the large memory capacity.

This section describes setting documents in the SPF or on the original table.

When Using the SPF:

Confirm that there are no

documents on the original table

and that copying is not in progress,

then gently close the original cover.

Adjust the document guides to the

width of your document.

Place the document face up and

push it gently into the document

feeder tray. The top edge of the

document should enter the fax first.

There are two ways to send the fax:

• To scan the document into memory,

then dial and transmit, continue with

the "Dialling and Transmitting"

section.

• To dial and transmit the document

directly without first scanning it into

memory, press the DOCUMENT key.

"DIRECT SEND" will appear in the

display. Continue with the "Dialling

and Transmitting" section.

Original face up

4-1

Table of Contents