Speaker Volume Setting; Transaction Report Print Select Setting; Activity Report Print Select Setting - Sharp AR-FX7 Operation Manual

KEY OPERATOR PROGRAMS

SPEAKER VOLUME SETTING

This setting is used to adjust the volume of the
following four types of sounds heard through the
speaker.
• SPEAKER • LINE MONITOR
• RINGER VOLUME • TRANSMISSION COMPLETE SOUND
KEY OPERATOR PROGRAMS
VOLUME ADJUSTMENT
SPEAKER
RINGER VOLUME
LINE MONITOR
Low Medium High
To change a volume setting, touch the desired volume
key.
The factory default setting is "Medium".
TRANSMISSION COMPLETE SOUND
SETTING
This program is used to select the beep pattern that
signals the end of transmission or reception. Touch
[PATTERN 1], [PATTERN 2], or [PATTERN 3].
To listen to beep pattern, touch the [CHECK] key.
The factory default setting is "PATTERN 2".
TRANSMISSION COMPLETE SOUND
TIME SETTING
This program is used to select the length of the beep
that signals the end of transmission or reception.
Selections are [2.0 sec], [2.5 sec], [3.0 sec], [3.5 sec],
and [4.0 sec].
The factory default setting is "3.0 sec".
ACTIVITY REPORT PRINT SELECT
SETTING
This setting is used to have an activity report
automatically printed at regular intervals.
To have the report automatically printed every 50
transactions (transmissions and receptions), select the
[AUTO PRINT AT MEMORY FULL] checkbox. To have
the report automatically printed at a specified time each
day (only once a day), check the [PRINT DAILY AT
DESIGNATED TIME] box and then select the time with
the [HOUR] and [MINUTE] keys that appear.
KEY OPERATOR PROGRAMS

ACTIVITY REPORT PRINT SELECT SETTING

AUTO PRINT AT MEMORY FULL
PRINT DAILY AT DESIGNATED TIME
Touch the [HOUR] key and then set the hour by touching
the and keys. Set the minute in the same way.
Touch [AM] or [PM] and then touch the [OK] key.
98
OK
Off
OK
HOUR MINUTE
13 01
AM
PM
[AUTO PRINT AT MEMORY FULL] and [PRINT
DAILY AT DESIGNATED TIME] can be
simultaneously selected.
The factory default settings are as follows:
• AUTO PRINT AT MEMORY FULL: Disabled
• PRINT DAILY AT DESIGNATED TIME: Disabled
• If you only select the PRINT DAILY AT
Note
DESIGNATED TIME setting and the
number of recorded transactions exceeds
50 before the specified time, each new
transaction will delete the oldest
transaction (the oldest transaction will not
be printed).
• The activity report can also be printed out
on demand. ("PRINTING REPORTS"
(p.85))
TRANSACTION REPORT PRINT
SELECT SETTING
This setting is used to select the conditions for printing
out Transaction Reports. Conditions can be selected
for regular transmissions, broadcast transmissions,
receptions, and confidential receptions.
KEY OPERATOR PROGRAMS

TRANSACTION REPORT PRINT SELECT SETTING

SINGLE SENDING
PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
Touch the key to display the next setting. Select the
print conditions for receptions and confidential receptions.
KEY OPERATOR PROGRAMS
TRANSACTION REPORT PRINT SELECT SETTING
RECEIVING
PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
The factory default settings are as follows:
• SINGLE SENDING: PRINT OUT ERROR REPORT
ONLY
• BROADCASTING: PRINT OUT ALL REPORT
• RECEIVING: NO PRINTED REPORT
• CONFIDENTIAL RECEPTION: PRINT OUT NOTICE
OK
BROADCASTING
1/2
PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT
OK
CONFIDENTIAL RECEPTION
2/2
PRINT OUT NOTICE PAGE
NO PRINTED REPORT
PAGE