Controlling Your Projectors; Configuring The Monitoring Interval - Epson PowerLite 7900p User Manual

Controlling Your Projectors

The control buttons in the upper-right let you turn on and off the
projectors and select video sources. (Hold the mouse pointer over a
button to see a description of its meaning.) Make sure you've selected
the projector you want to operate (with the mouse pointer) before
clicking one of the buttons.

Configuring the Monitoring Interval

If you need to have the most current status information about your
projectors, click the
Refresh
You can also select how often EMP Monitor checks the projector
status:
1. From the Tool menu, select
2. Select the desired update interval and click
Control buttons
button in the EMP Monitor screen.
. You see this screen.
Configuration
.
OK
Managing the Projector from a Remote Computer
note
To turn on a projector when
it's in standby mode
(plugged in but not
projecting), you must have
selected as the
Network ON
setting in
Standby Mode
the projector's menu system
(see page 75).
Remember that when
Standby Mode is set to
, the exhaust
Network ON
fan continues to operate
after the projector has cooled
down. This is normal.
note
If you want EMP Monitor
to run whenever you start
your computer, click
Add to
.
Startup
95