Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, display a picture-in-picture image, and adjust
the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
On the projector's control panel, there are two
■
Press the
Computer/DVI
connected to the
Computer
button to switch between equipment connected to
Video/BNC
the
,
Video
S-Video
■
On the remote control, there are six
switch between equipment connected to the port identified on
each button. (The
PowerLite 7900p.)
After you select a source, the screen goes dark for a moment before the
image appears.
button to switch between equipment
and
ports. Or press the
DVI
, and
ports.
BNC
Source
button is not functional with the
EasyMP
buttons:
Source
buttons. Use them to
Using the Remote Control
note
You can use the projector's
menus to fine-tune the
picture and sound quality as
described in Chapter 4.
Source buttons
55