Connecting To Video Equipment - Epson PowerLite 7900p User Manual

RCA connector
(composite video)
S-Video connector
(4-pin mini-DIN)
BNC connector
(component video)
Setting Up the Projector
20

Connecting to Video Equipment

You can connect up to four video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video-output connections:
■ If your video player has a yellow RCA-style video output
connector, see "Connecting a Composite Video Source" on
page 21.
If your video player has an S-Video connector, see "Connecting
■
an S-Video Source" on page 22.
If your video player has a component video port (three connectors
■
labeled either Y/Cb/Cr or Y/Pb/Pr), see "Connecting a
Component Video Source" on page 23.
■ If your video player has an RGB video port (either a single
connector for a VGA-style monitor cable, or three connectors
labeled R/G/B), see "Connecting an RGB Video Source" on
page 24.
After connecting the video cables, you may also want to connect an
audio cable to play sound through the projector; see page 33.