Connecting And Configuring The Projector - Epson PowerLite 7900p User Manual

2. Click to install both EMP Monitor and EMP Network
Install
Manager.
3. Follow the on-screen instructions to install the software.
4. When you're finished, click
Once installed, you can access these programs from your computer's
Start menu.
Connecting and Configuring the
Projector
Before using the Easy Management software to manage your
projector(s), you have to connect each projector you want to monitor
to your network and configure it with an appropriate IP address.
1. Connect the projector to your network using a commercially
available 100baseTX or 10baseT network cable.
Connect the cable to the Ethernet port on the projector as shown.
Ethernet port
2. Turn on the projector (see page 36).
.
Exit
Managing the Projector from a Remote Computer
note
If you don't want to install
both programs, click
, select the program
Custom
you want to install on the
next screen, and click
.
Install
If you need to uninstall
the software, use the
Add/Remove Programs
utility in the Windows
Control Panel.
87