note
If you are not satisfied with
the corrections made, press
the
button for one
ESC
second to reset the screen to
its original shape.
Projecting
46
You see this screen:
[
[
[
[ESC]
[ESC] :Return (Press 1 second to
5. Press the
button to select the corner you want to adjust.
Enter
6. Use the
pointer button on the remote control (or the arrow
buttons on the projector) to adjust the shape.
7. Repeat steps 5 and 6 as needed to adjust any remaining corners.
8. When done, press the
projector's control panel to exit the menu system.
If
remains selected in the Keystone menu, the Quick
Quick Corner
Corner screen appears whenever you press the projector's
buttons. You can then follow steps 5 through 8 above to correct the
shape of your image, or press
]:Adjust
Adjust
/
]
]
:Move next
:Move next
:Return (Press 1 second to
reset)
reset)
button on the remote control or
ESC
to exit Quick Corner.
ESC
Keystone