Projecting
42
Adjusting the Image
Once you see your image, you need to make certain adjustments:
■
To focus or zoom your image, see below.
■
If the image is too high or too low, you can reposition it. See
page 43.
■
If the image isn't square, see page 44.
If a computer image displays incorrectly, see page 47.
■
If you need to fine-tune the image and/or sound, see Chapter 4.
Focusing and Zooming Your Image
Use the
ring on the projector to sharpen the image.
Focus
Use the
ring on the projector to reduce or enlarge the image.
Zoom
Move the tab toward the
decrease it.
Focus ring
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
buttons on the remote control to zoom in on a portion of the image.
See page 57 for instructions.
to increase the size, and toward the
W
Zoom ring
to
T
E-Zoom