7. When you see this screen, select a zoom rate (display size), and
then press
.
Enter
Set the zoom rate.
Zoom rate:
8. When you see the message
and press
Yes
Enter
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message
Choosing When to Display the Image
After your image is saved, you can set it up as the startup screen, or the
screen you see when there's no signal or when your press the
button.
Mute
1. Press the
button to display the menus screen (if not already
Menu
displayed).
2. To display your image as the startup screen, select the
menu.
Advanced1
3. Select
Startup Screen
4. Select the
Setting
User's Logo
100% 200% 300%
Save image as user's logo?
. Saving the logo takes about 15 seconds. Do
, press
Completed
, highlight
, and press
ON
menu.
, select
.
Esc
A/V
.
Enter
Fine-tuning the Projector
note
If the
User's Logo Protect
option has been set to
,
ON
the
and
No-Signal Msg.
settings cannot be
A/V Mute
changed. You need to turn
the protect function off first.
See page 81 for details.
Once you've saved a user's
logo, you cannot reset the logo
setting to its factory default
(no logo).
79