Creating Your Own Screen Logo - Epson PowerLite 7900p User Manual

note
If the
User's Logo Protect
option is , you see a
ON
message that the logo cannot
be recorded. You'll need to
disable the
User's Logo
option before you
Protect
can create or change the
user's logo. See page 81.
Fine-tuning the Projector
78

Creating Your Own Screen Logo

You can transfer any image on your computer to the projector, and
then use it as the startup screen and/or the screen that is displayed
when you press the A/V Mute button. The image can be a company
logo, slogan, photograph, or any other image you want to use. The
projector considers this image the "User's Logo."
Follow these steps to capture the image and transfer it to the projector:
1. Display the image you want to use on the projector. You can use
an image from either a computer or video source, such as a VCR.
2. Press the button and select the
Menu
Video
Audio
Effect
Setting
User's Logo
Advanced1
Advanced2
About
Reset All
[ [ ]: Select ]: Select [ ]: Execute
3. Press to select
Enter
4. When you see a message asking if you want to use the present
image as a user's logo, select
displays over the image.
5. Use the pointer button on the remote control or the arrow
buttons on the projector to select the area of the image you want
to use. Once you have selected the area, press
6. When you see the message
press . If you want to change the area selected, select
Enter
press and repeat steps 4 through 6.
Enter
User's Logo
Execute
.
Execute
and press
Yes Enter
Select this image?
menu.
[Menu]: Exit
. A selection box
.
Enter
, choose and
Yes
,
No