Epson PowerLite 7900p User Manual page 45

Using Keystone Correction
To adjust your image when it is wider on one side, do the following:
■ Look at the shapes of the icons on the projector's four
buttons. Press the button whose icon is the mirror image of the
shape of your screen image. Continue pressing the button until
you are satisfied with the shape of the image.
Or press the
■
Menu
menu, and press
Setting
in the Keystone menu and press
H/V-Keystone
(for vertical keystone distortion) or
V-Keystone
horizontal keystone distortion) and press
pointer button on the remote control to adjust the keystone
setting as needed.
Using Quick Corner
Use Quick Corner to correct a trapezoid-shaped image, with no
parallel sides:
1. Press the button on the remote control (or on the
Menu
projector's control panel).
2. Select the
Setting
3. From the Setting menu, select
4. Select
Quick Corner
button on the remote control, select the
. From the Setting menu, select
Enter
menu and press .
Enter
Keystone
and press .
Enter
Keystone
Keystone
buttons
. Select
Enter
(for
H-Keystone
. Use the
Enter
and press .
Enter
note
The image will be slightly
shorter after adjusting. If it's
important to maintain the
correct aspect ratio, use the
menu system to perform
keystone correction, then
adjust the Height setting as
needed. See page 71.
Menu
button
note
For more information on
using the menu system, see
Chapter 4.
Projecting
45