Using The Macintosh Desktop Adapter - Epson PowerLite 7900p User Manual
Epson user manual multimedia projector powerlite 7900pnl
Hide thumbs
Also See for PowerLite 7900p:
- Product information (24 pages) ,
- Product support bulletin (7 pages) ,
- Lens installation (5 pages)
Table of Contents
Advertisement
Setting Up the Projector
30
Using the Macintosh Desktop Adapter
If you have an older desktop Macintosh or PowerBook, the VGA
cable may not fit when you try to connect it. If so, you'll need to use
the Macintosh desktop adapter to connect the VGA cable to your
computer. This is available from Epson (see page 15).
1. To use the adapter, remove its cover as shown and set its DIP
switches according to the resolution you want to use, such as
16-inch mode. See the instructions included with the adapter.
2. Replace the cover and connect the adapter
to the VGA cable. Then plug the cable
(with the adapter) into the video port on
your Macintosh.
3. Tighten the screws on the connectors.
Advertisement
Table of Contents
