Replacing The Batteries - Epson PowerLite 7900p User Manual

Epson user manual multimedia projector powerlite 7900pnl
Hide thumbs Also See for PowerLite 7900p:
Table of Contents

Advertisement

caution
When replacing batteries,
take the following
precautions:
Replace the batteries as
soon as they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.
Do not expose batteries to
heat or flame.
Dispose of used batteries
according to local
regulations.
Remove the batteries if
you won't be using the
projector for a long period of
time.
Using the Remote Control
54

Replacing the Batteries

If the projector stops responding to the remote control, check the
following:
Make sure the remote control's ON/OFF switch (shown on
page 52) is in the
ON
Press the
light button and check to see if the buttons on the
remote control light up. (If you're in a bright room, you may not
be able to see them light.)
If the buttons do not light up, replace the batteries as described below:
1. Turn the remote control over.
2. Press down on the ridges at one
end of the battery cover as you
slide the cover off.
3. Install two AA batteries, inserting
the flat (negative) ends in first.
4. Slide the cover back in place.
position.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerlite 7900pnl

Table of Contents