Resetting The Lamp Timer - Epson PowerLite 7900p User Manual

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the
projector's menu.
1. Plug the projector in and turn it on.
2. Press the button on the remote control (or on the
Menu
projector's control panel). You see the main menu.
3. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
You see this screen:
Video Lamp (High Brightness)
Audio
Effect Reset Lamp Timer
Setting
Source
User's Logo
Input Signal
Advanced1
Frequency
Advanced2
About
SYNC Polarity
Reset All
SYNC Mode
Resolution
Refresh Rate
[ ]: Select [ ]: Enter
4. Select
Reset Lamp Timer
prompt:
5. Select , then press
Yes
6. When you're finished, press
About
: 0H
(Low Brightness) : 0H
Execute
: Computer
: Auto
: H ---.---kHz
: V ---.---Hz
: H ------
: V ------
: ------
: ----x ----
: ---.-- Hz
[Menu]: Exit
, then press
Enter
Reset Lamp Timer Reset Lamp Timer
Execute? Execute?
NO NO
YES YES
.
Enter
or to exit.
E Menu
SC
, then press .
Enter
Lamp usage
. You see this
Maintaining the Projector
note
The lamp usage timer shows
0H until you've used the
lamp for at least 10 hours.
107