Fine-tuning the Projector
74
Customizing Projector Features
You can use the menu system to change the video signal input at
certain ports, turn sleep mode on or off, adjust the network settings,
change the language, and customize several other features.
Image Setup Options
Use these settings to change how the projector processes incoming
video signals. Several of these settings should normally be left at the
factory default setting (except for the
settings).
■
Computer Input (in the Setting menu)
Select the setting for the type of equipment you've connected to
the
port:
Computer
: To have the projector automatically detect the signal
Auto
: For a video player that outputs an RGB video signal
RGB
Component Video
video signal.
■
BNC Input (in the Setting menu)
Select the setting for the type of equipment you've connected to
the BNC ports:
: To have the projector automatically detect the signal
Auto
: For a video player that outputs an RGB video signal
RGB
Component Video
video signal
■
Video Signal (in the Video menu)
Leave this setting at
system (select
PAL60
displaying an image through the
Computer
: For a video player that outputs a component
: For a video player that outputs a component
unless you are using a 60-hertz PAL
Auto
). You can change this setting only if you're
or
Video
and
BNC Input
port.
S-Video