Connecting A Composite Video Source - Epson PowerLite 7900p User Manual

Connecting a Composite Video Source

1. Locate an RCA-style video cable (one may be included with your
video equipment).
2. Connect the cable to the yellow video output connector on your
player and the yellow
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.
5. Once the projector is turned on, enter the projector's Video menu
and make sure Video Signal is set to
connector on the projector:
Video
; see page 74.
Auto
Setting Up the Projector
21