Correcting Computer Images
If you're connected to a computer and the image doesn't look right,
press the
button on the remote control (or the
Auto
button on the projector's control panel). This automatically resets the
projector's tracking, sync, resolution, and position settings.
If vertical stripes appear in the projected image and the
doesn't correct the problem, hold down the
projector's control panel while pressing either the
button.
Tracking –
If the image appears fuzzy or flickers and the
correct the problem, hold down the
the
or
Sync +
Sync –
Adjusting the Volume
You can use the buttons on the remote control or projector to increase
or decrease the volume for the projector's built-in speaker or external
speakers connected to the projector. Press the
the volume, or the
button to decrease it.
Shift
button while pressing either
Shift
button.
Auto/Enter
button
Auto
button on the
or the
Tracking +
button doesn't
Auto
button to increase
note
You must be projecting an
image for this button to have
any effect. The
button
Auto
works only with computer
images.
note
You can also adjust the
volume using the projector's
menu system. See page 73.
Projecting
47