Choosing When To Display The Image - Epson PowerLite 735c User Manual

4. Use the arrow buttons to select the area of the image you want to
use. Then press
Enter
5. When you see the message "Select this image?" highlight
press .
Enter
6. Use the arrow buttons to select a zoom rate (display size), and
then press .
Enter
7. When the message "Do you save the user's logo?" appears, select
and press
Yes Enter
Saving the logo may take a few moments. Do not use your
projector or video source (computer, DVD player, etc.) while the
logo is being saved.
8. When you see the message "Saving the user's logo is completed,"
press to return to the menu screen.
Esc

Choosing When to Display the Image

After your image is saved, you can set it up as the no-signal message
and/or the screen that's displayed when you press
1. Press the button to display the menu screen (if not already
Menu
displayed).
2. Use the arrow buttons to highlight the
.
Enter
3. Use the arrow buttons to highlight either
, depending on when you want the image to display.
Mute
4. Use the arrow buttons to select
your image as the screen to be displayed.
5. When you're finished, press
.
. Confirm as needed.
Setting
No-Signal Msg
, then press
Logo
to exit.
Menu
and
Yes
.
A/V Mute
menu, then press
. or
A/V
. This sets
Enter
Fine-tuning the Projector
note
You can also set up your
image as the startup screen
using the Advanced menu;
see page 81.
79