Choosing When To Display The Image - Epson PowerLite 1716 User Manual

2. Highlight
User's Logo
3. When you see a message asking
, select
user's logo?
over the image.
4. Use the pointer button to select the area of the image you
want to use. Then press
5. When you see the message
and press .
Enter
6. Use the arrow buttons to select a zoom factor (display size) and
press .
Enter
7. When the message
appears, select
Yes
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message
menu screen.

Choosing When to Display the Image

After your image is saved, it is automatically set as the startup screen.
You can also set it to display as the screen you see when there's no
signal or when you press the
1. Press the button, highlight the
Menu
.
Enter
and press .
Enter
Choose this image as the
and press . A selection box displays
Yes Enter
.
Enter
Select this Image?
Save this image as the user's logo?
and press . Saving the logo may take a
Enter
, press
Completed
button (see page 30).
A/V Mute
Extended
, highlight
Yes
to return to the
Esc
menu, and press
Fine-Tuning the Projector
note
You can also use this menu
to turn off the startup screen,
disable message display, or
change the background
color.
109