Choosing When To Display The Image - Epson PowerLite Pro G5900 User Manual

Fine-Tuning the Projector
76
2. Highlight
User's Logo
3. When you see a message asking
, select
User's Logo?
displays over the image.
4. Use the pointer button on the remote control (or the arrow
buttons on the projector) to select the area of the image you want
to use. Then press
5. When you see the message
and press .
Enter
6. Highlight a zoom factor (display size) and press
7. When the message
appears, select
Yes
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message

Choosing When to Display the Image

After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the button, highlight the
Menu
.
Enter
2. Select and press
Display
and press .
Enter
Choose this image as the
and press
Yes Enter
.
Enter
Select this image?
Save this image as the User's Logo?
and press . Saving the logo may take a
Enter
, press
Completed
button (see page 45).
Extended
.
Enter
. A selection box
, highlight
Yes
.
Enter
to exit.
Menu
menu, and press