Creating Your Own Screen Logo - Epson PowerLite 400W User Manual

Creating Your Own Screen Logo

You can transfer any image on your computer to the projector, and
then use it as the startup screen and/or the screen that is displayed
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use. The
projector considers this image the "User's Logo."
Follow these steps to capture the image and transfer it to the projector:
1. Display the image you want to use on the projector. You can use
an image from a computer or video source, such as a DVD player.
2. Press the button and select the
Menu
3. Use the down arrow button and press
.
Logo
4. When you see a message asking if you want to use the present
image as a user's logo, select
displays over the image.
5. Use the arrow buttons on the projector or remote control to select
the area of the image you want to use. Once you have selected the
area, press .
Enter
6. When you see the message
, choose
Logo? Yes
area selected, select
button. The image can be a company
Extended
Enter
and press
Yes
Choose this image as the User's
and press . If you want to change the
Enter
, press and repeat steps 5 and 6.
No Enter
menu.
to select
User's
. A selection box
Enter
Fine-tuning the Projector
note
If the User's Logo Protect
function is , you see a
ON
message that the logo cannot
be recorded. You'll need to
disable the User's Logo
Protect function before you
can create or change the
User's Logo. See page 69.
67