note
If the User's Logo Protect
function is
, you see a
ON
message that the logo cannot
be recorded. You'll need to
disable the User's Logo
Protect function before you
can create or change the
User's Logo. See page 68.
Fine-tuning the Projector
66
Creating Your Own Screen Logo
You can transfer any image on your computer to the projector, and
then use it as the startup screen and/or the screen that is displayed
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use. The
projector considers this image the "User's Logo".
Follow these steps to capture the image and transfer it to the projector:
1. Display the image you want to use on the projector. You can use
an image from either a computer or image source.
2. Press the
button and select the
Menu
PowerLite 260d
PowerLite 280d
3. Use the down arrow button and press
.
Logo
button. The image can be a company
Extended
to select
Enter
menu.
User's